Set lengths for discrete 2 of 5 – Datalogic Scanning QUICKSCAN QD 2300 User Manual

Page 137

Advertising
background image

Discrete 2 of 5 (DTF)

Product Reference Guide

131

Set Lengths for Discrete 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters),
including check digit(s) the code contains. Set lengths for D 2 of 5 to any length, one or
two discrete lengths, or lengths within a specific range.

One Discrete Length - Select this option to decode only D 2 of 5 bar codes containing a
selected length. Select the length using the numeric bar codes in

Appendix E, Keypad

.

For example, to decode only D 2 of 5 bar codes with 14 characters, scan D 2 of 5 - One
Discrete Length, then scan 1 followed by 4. To correct an error or to change the selec-
tion, scan the CANCEL bar code located in

Appendix E, Keypad

.

Two Discrete Lengths - Select this option to decode only D 2 of 5 bar codes contain-
ing either of two selected lengths. Select lengths using the numeric bar codes in

Appen-

dix E, Keypad

. For example, to decode only those D 2 of 5 bar codes containing either 2

or 14 characters, select D 2 of 5 - Two Discrete Lengths, then scan 0, 2, 1, and then 4.
To correct an error or to change the selection, scan the CANCEL bar code located in

Appendix E, Keypad

.

Length Within Range - Select this option to decode a D 2 of 5 bar code with a spe-
cific length range. Select lengths using numeric bar codes in

Appendix E, Keypad

.

For example, to decode D 2 of 5 bar codes containing between 4 and 12 characters,
first scan D 2 of 5 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers
must always be preceded by a leading zero). To correct an error or change the selection,
scan the CANCEL bar code located in

Appendix E, Keypad

.

Any Length - Scan this option to decode D 2 of 5 bar codes containing any number of
characters within the scanner capability.

NOTE

Due to the construction of the D 2 of 5 symbology, it is possible for a scan
line covering only a portion of the code to be interpreted as a complete scan,
yielding less data than is encoded in the bar code. To prevent this, select
specific lengths (D 2 of 5 - One Discrete Length - Two Discrete Lengths) for D
2 of 5 applications.

Advertising