Flowserve HV 205 - Manual (Page 8)

8
Important Notes
Usage for the intended purpose
The hydraulically operated loading and unloading system HV 205 is intended solely for
filling and draining stationary and mobile tanks containing pressure liquefied gases.
Its use is permissible only within the allowable pressure and temperature ratings and only
if the chemical and corrosive influences on the equipment are taken into account.
Changes in the design may only be performed if the manufacturer's written permission is
obtained.
Any type of use differing from the usage described above must be considered as
improper. The resulting risk will have to be borne by the user alone. The manufacturer
hereby expressly rejects any claims for any resulting damage.
Safety Notes
The loading and unloading system must not be installed, removed, commissioned,
operated or maintained by anyone other than qualified staff. Qualified staff are those
persons who - through adequate training, the use and application of safety equipment in
accordance with regulations concerning safety systems, and first aid & accident
prevention - have achieved a recognised level of competence appropriate to the
installation and commissioning of this device.
For installation, removal, commissioning, operation and maintenance, every person who
works with the loading and unloading system must have read and understood the
complete installation manual. Furthermore, responsibilities must have been defined
clearly and unambiguously and must be adhered to.
Usage of the system for the intended purpose includes compliance with the rules and
notes in these installation instructions for installation, removal, commissioning, operation
and maintenance.
The operating company must ensure that, whenever the loading and unloading system
is being operated, it is in perfect condition.
Attention
Working methods that jeopardise safety must not be used!