FSR TN-2105 User Manual

Page 3

Advertising
background image

INTRODUCTION

The Table Navigator, from FSR, is the perfect solution for the
classroom, church or boardroom where 2 computer and audio
inputs need to be switched and sent to display devices which are
located way more than 25 feet. Computer video signals quickly lose
color and clarity after about 25 feet. In addition, audio signals easily
pick up noise if they are not balanced.

The Table Navigator solves both of these problems and more in one
easy to install package.

The Table Navigator combines an A/B auto switch, an ultra high
bandwidth line driver and an active audio balancer into one easy to
install package. The unit also features user selectable cable
equalization, a fully buffered local monitor output, remote switch
operation via a contact closure and greater than 400MHz of
bandwidth.

It also functions as a universal interface when connected to any
FSR seamless switcher, allowing for one central connection point
for composite, S-Video component video and RGB signals.

The Table Navigator may be mounted under a table, podium or
shelf with the included mounting bracket. An optional rack kit
allows it to be mounted in a standard 19" rack.

If this Table Navigator is mounted under the table or lectern, a
more convenient way to hookup a laptop (or equivalent device)
would be to use the T-3U Table Box with the pull out cable. This
arrangement provides the convenience of the table top box with the
advanced electronics of the Navigator.

TECHNICAL SPECIFICATIONS

VIDEO INPUT
Number/type:

2 VGA / SVGA / XGA / SXGA / UXGA /

RGBHV / RGBS / RGsB / RsGsBs

Connectors:

Two, 15 pin HD female

Level (nominal):

Analog 0.7 Vp-p

Level (maximum):

2 Vp-p

Impedance:

75 ohms

EQUALIZED VIDEO OUTPUT
Number/type:

1 VGA / SVGA / XGA / SXGA / UXGA /

RGBHV / RGBS / RGsB / RsGsBs

Connectors:

5 female BNC’s ( RGBHV )

Bandwidth:

400 MHz @ -3 dB

100' cable

180 MHz @ +/-0.5dB, Gain LOW

150' cable

150 MHz @ +/-0.5dB, Gain HIGH

Level (nominal):

Unity / User adjustable via HI / LOW / OFF

Jumper

Gain:

HI = 125’ to 175’, LOW = 60’ to 125’, OFF
= 0’ to 60’

Impedance:

75 ohms

Design Cable:

West Penn WP8255 or equal

LOCAL VIDEO OUTPUT
Number/type:

1 VGA / SVGA / XGA / SXGA / UXGA /

RGBHV / RGBS / RGsB / RsGsBs

Connectors:

One 15 pin HD female

Bandwidth:

320MHz @ -3dB

Gain:

Unity (buffered)

Impedance:

75 ohms

AUDIO
Bandwidth:

20 Hz to 20 kHz (+/-0.05 dB)

THD + Noise:

0.01% @ 20 kHz at rated Max Output S/N
>98 dB

Noise Floor:

< 98 dB

Stereo separation:

-90 dB @ 1 kHz

Advertising