GAI-Tronics IPE2500A, IPE2500A-MLS Paging Encoder / Desktop Controller User and Installatoin Manual - Manual (Page 31)

IPE2500A and IPE2500A-MLS Paging Encoder/Desktop Controller Operation
25 03/12
Entering a Programmed Alias
If paging aliases have been programmed into the desk set, press either the
UP
or the
DOWN
button after
entering the paging menu. To scroll alphabetically, press the combination of either
CTL
+
UP
or
CTL
+
DOWN
buttons. The alias that begins with the next (or the previous) letter of the alphabet is
displayed.
Sending the Page
When the desired page appears on the display, press
MONITOR
to make sure the radio channel is not in
use. If programmed with an auto-channel selection, the unit selects that channel before sending the
monitor control.
When the channel is free, press
TRANSMIT
. Paging tones are generated and the LCD displays:
TALK NOW (
This is provided that talk time has been enabled for this type of paging or alias.)
Mic audio is transmitted to the paged individual. When the preprogrammed talk time has elapsed, the
desk set exits the paging mode and returns to normal operation. If the ‘do not revert’ option is selected,
and the auto channel selection is programmed for a paging alias, the unit remains on the same channel
until changed by the user.