Gasboy Atlas Single Std. Inlet Centering Kit - Manual

MDE-4637A Single Standard Pump/Dispenser Inlet Centering Kit (M07676K00X) Installation for Atlas™ Units · August 2007 Page 1
Introduction
Purpose
The purpose of the Single Standard Pump/Dispenser Inlet Centering Kit (M07676K00X) is to
provide a method for centering the product inlet on standard Atlas
™ single product models
during unit installation. This will provide the unit with a 2 inch NPT-centered connection, and
it can be used on Atlas single product or Twin 1 product (TW1) models.
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Installation of the Kit 5
Kits
Part Number Description
M07676K001 Atlas Standard Dispenser Inlet Centering Kit
M07676K002 Atlas Standard Pump Inlet Centering Kit
Required Tools
The following tools are required for the installation of M07676K00X kits:
• Allen Wrench, Metric
• Gloves, Rubber
• Grease, Silicone
• Ratchet Set, Metric
• Wrench Set, Metric Open-end
Parts List
The following table lists the parts included in the Single Standard Dispenser Inlet Centering
kit (M07676K001).
Item Description Part Number Quantity
1 Inlet Manifold M05347B010 1
2 M10 X 25 Socket Head Screw M04973B005 6
3 M10 Lock washer M01071B001 6
4 Gasket M06101B001 2
5 Dispenser Manifold Blanking Spacer M07671B001 1
MDE-4637A
Single Standard Pump/Dispenser Inlet Centering
Kit (M07676K00X) Installation for Atlas ™ Units
August 2007