Gasboy 9100 Series - Manual

MDE-4809 Atlas™ 9100 Series Totalizer Retrofit Kit (M05813K004) Installation Instructions · May 2009 Page 1
Introduction
Purpose
This manual provides instructions to install the Lower Front Totalizer Retrofit Kit for Atlas ™
9100 Series Units (M05813K004).
Note: A new Bezel with a totalizer opening may be required when installing the kit. Use
templates to identify the correct Bezel.
Table of Contents
Topic Page
Introduction 1
Important Safety Information 3
Installation of the Lower Totalizer Retrofit Kit 5
Required Tools
The following tools are required for the installation of the kit:
• Phillips ® Screwdriver
• Wrench
• Hammer and Punch
Parts List
The following table lists the parts included in this kit.
Item Description Part Number Quantity
1 Face Dial Blank Totalizer 025548 1
2 Nut Hex Keps W/EXT LW 6 Q12068-02 10
3 SCR SLF V/R 510500-325 S00702 1
4 Modified Gear Plate Assy 015891 1
5 Totalizer 8 WH VR 370016 S65336 1
6 SCR V/R 510500-327 S00704 2
7 Totalizer Seal V/R 28698K S00207 2
8 INSTR-9100 Series Front T 032933 1
9 8 X 10 X 4 200#C.K. R.S. 018072 1
10 CRTN 25-3/4X9-3/4X6-1/8 R 018116 1
MDE-4809
Atlas ™ 9100 Series Totalizer Retrofit Kit
(M05813K004) Installation Instructions
May 2009