Gasboy Atlas Fuel Systems Installation Manual User Manual
Installation manual
Advertising
Table of contents
Document Outline
- MDE-4331M Atlas® Fuel Systems Installation Manual
- Table of Contents
- 1 – Introduction
- 2 – Important Safety Information
- 3 – Hazardous Locations
- 4 – Control Lines for Atlas Electronic Series
- Purpose
- Grounding
- Micro Feed
- Micro Neutral
- External Valve
- Neutral Feed
- Auth Input Dispensers
- Submersible Starter Drive (Subm Starter Drive)
- Submersible Pump Drive (Subm Pump Drive)
- Reset Complete (Switch Detect)/Slow Flow
- Fast Flow Valve
- Phase 2 Feed
- Slow/Fast Satellite Return
- Light Feed
- Light Neutral
- Pulser
- RS-485
- Local Area Network (LAN)/Wide Area Network (WAN)
- 5 – Control Lines for Atlas Mechanical Series
- 6 – Installation
- Purpose
- Required Equipment and Materials
- Important Requirements for E85 Units
- Important Considerations when Changing Fuel Types
- Read NFPA 30A and NFPA 70
- Preparing for Installation
- Before Placing Unit on Fuel Island
- Lifting Units
- Connecting Pump/Dispenser Inlet Pipes
- Model 9850KXTW1 Shear Valve Configuration
- OPW Shear Valve for 9862KXTW1 DEF Unit
- Anchoring Pump/Dispenser to Island
- Connecting Vapor Return Line to Vapor Shear Valve
- Wiring Dispenser (STP-supplied Unit) for All Models
- Wiring Pump (Self-contained Unit) for All Models
- Testing New Field Wiring
- Completing Field Wiring
- Installing Breakaways, Hoses, Swivels, and Nozzles
- DEF Dispensers - ZVA™ DEF Nozzle
- Do Not Turn on AC Power
- Purging Air from System
- Installation Checklists
- Calibration
- 7 – Reference Information
- 8 – Start-up and Test for Atlas Electronic Series
- 9 – Start-up for Atlas Mechanical Series
- Appendix: Atlas Diagrams
- Index