Gasboy Atlas Fuel Systems Installation Manual - Manual (Page 43)

MDE-4331M Atlas® Fuel Systems Installation Manual · September 2014 Page 6-13
Anchoring Pump/Dispenser to Island Installation
2 Loosely anchor the pump/dispenser to the island as per the foundation layout locations using
all the required anchoring points, according to the following:
• Use 1/2-inch anchor studs with large heavy duty washers (slot designed for that size).
• Use bolts or studs that are of grade 5 steel.
• Use hardware that is corrosion-protected or resistant.
Note: Do not use plastic or low strength bolts, or pallet bolts.
• Studs/bolts must be anchored securely to the island or pit box (see Figure 6-5 ).
• See the anchor or pit box manufacturer’s instructions for important information.
Figure 6-5: Anchors for Pump/Dispenser
Contractor-supplied
Fittings (for example,
Union).
Anchor Bolts