Gasboy M08400 User Manual
Gasboy Hardware
MDE-4740B Atlas™ Bezel Upgrade Kit (M08400K001) Installation Instructions · February 2010
Page 1
Introduction
Purpose
This document provides instructions to install the Atlas
™
Bezel (M08400A001) using the
M08400K001 Upgrade Kit.
Note: The instructions are also applicable for installing the M08685K001 kit that is intended
for replacing only the Gaskets in the Atlas Bezel. The M08685K001 kit does not include
the Atlas Bezel Assembly.
Ordering Information
Note: Refer to Gasboy
®
Price List GPL-5100 for more information.
The Atlas M08400K001 Bezel Assembly is a retrofit bezel for Atlas models only. It consists of
a rigid structural foam frame with one-piece polycarbonate lense and Tedlar style
polycarbonate graphic panels and brands. When ordering for the replacement, you must
provide the following information so that the correct dial face can be provided:
• Original unit model number (9853KXTW1-DZ)
• Original unit serial number (AT00XXXX)
• Side A or Side B (field wiring junction box is on Side A)
• Does the original unit have totalizers?
• Language
• Unit of measure (Gallons or Liters)
• Branding information
Intended Users
This document is intended for Gasboy-certified Authorized Service Contractors (ASCs) and
Customer Specified Contractors (CSCs).
Table of Contents
Topic
Page
MDE-4740B
Atlas
™
Bezel Upgrade Kit (M08400K001)
Installation Instructions
February 2010