Geist RCX Series v3 - Manual (Page 18)

GM1111 18 Revision Date 4/3/2014
Logging Page
The Logging page allows the user to access the historical data by selecting the desired sensors
and time range to be logged. The Sensor Measurement Data Graph section contains check
boxes which allow the user to select which readings are to be graphed on the Logging page
and/or displayed on the internal LCD (Delta configuration only) or RSD2X8 remote display
module.
The “Logging Control” allows users to select between different modes of logging data.
 Normal: Data logged once per minute into data log file.
 High-water Mark: High value logged each minute into the data log file.
 Low-water Mark: Low value logged each minute into the data log file.
 Logging Off
The data will be logged into the data file at a rate of one point per minute and will be available
for graphing and display. Please note that although data is logged once per minute, all sensor
data used in the real time display and alarm functions is read at least once every 15 seconds
for internal sensors and once every 30 seconds for external sensors. Recorded data is available
for download in a comma-separated values (CSV) file. To reset the logs click the “Reset Logs”
check box and save the changes.
Figure 20: Logging Page