Hypertherm D845GEBV2 - Manual (Page 100)

Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
100
Table 56. PCI Configuration Submenu (continued)
Feature Options Description
PCI Slot5 IRQ Priority
(Note 1, Note 2)
• Auto (default)
• 5
• 9
• 10
• 11 Allows selection of IRQ priority for PCI bus connector 5.
PCI Slot6 IRQ Priority
(Note 1, Note 2)
• Auto (default)
• 5
• 9
• 10
• 11 Allows selection of IRQ priority for PCI bus connector 6.
Notes
1. Additional interrupts may be available if certain onboard devices (such as the serial and parallel ports) are disabled.
2. This option appears only on the Desktop Board D845GEBV2.
4.4.2 Boot Configuration Submenu
To access this submenu, select Advanced on the menu bar and then Boot Configuration.
Maintenance Main Advanced Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
The submenu represented by Table 57 is for setting Plug and Play options, resetting configuration
data, and the power-on state of the Numlock key.
Table 57. Boot Configuration Submenu
Feature Options Description
Plug & Play O/S • No (default)
• Yes Specifies if manual configuration is desired.
No lets the BIOS configure all devices. This setting is
appropriate when using a Plug and Play operating system.
Yes lets the operating system configure Plug and Play
devices not required to boot the system. This option is
available for use during lab testing.
Numlock • Off
• On (default) Specifies the power-on state of the Numlock feature on the
numeric keypad of the keyboard.