Hypertherm D845GEBV2 - Manual (Page 95)

95
4 BIOS Setup Program
What This Chapter Contains
4.1 Introduction.................................................................................................................95
4.2 Maintenance Menu .....................................................................................................96
4.3 Main Menu..................................................................................................................97
4.4 Advanced Menu..........................................................................................................98
4.5 Security Menu ..........................................................................................................113
4.6 Power Menu .............................................................................................................114
4.7 Boot Menu ................................................................................................................115
4.8 Exit Menu .................................................................................................................118
4.1 Introduction
The BIOS Setup program can be used to view and change the BIOS settings for the computer. The
BIOS Setup program is accessed by pressing the <F2> key after the Power-On Self-Test (POST)
memory test begins and before the operating system boot begins. The menu bar is shown below.
Maintenance Main Advanced Security Power Boot Exit
Table 51 lists the BIOS Setup program menu features.
Table 51. BIOS Setup Program Menu Bar
Maintenance Main Advanced Security Power Boot Exit
Clears
passwords and
BIS credentials
and enables
extended
configuration
mode Allocates
resources for
hardware
components Configures
advanced
features
available
through the
chipset Sets
passwords
and security
features Configures
power
management
features Selects boot
options and
power supply
controls Saves or
discards
changes to
Setup
program
options
For information about Refer to
Boot Integrity Services (BIS) Section 1.5, page 20
✏
NOTE
In this chapter, all examples of the BIOS Setup program menu bar include the maintenance menu;
however, the maintenance menu is displayed only when the Desktop Board is in configuration
mode. Section 2.9.2 on page 73 tells how to put the Desktop Board in configuration mode.