Hypertherm D845GEBV2 User Manual
Page 64
Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
64
Table 25. Front Panel Audio Connector
Pin
Signal Name
Pin
Signal Name
1 MIC_IN
2 Ground
3 MIC_BIAS
4 +5
V
5 RIGHT_OUT
6 RIGHT_IN
7 Ground
8 Key
9 LEFT_OUT
10 LEFT_IN
#
INTEGRATOR’S NOTE
The front panel audio connector is alternately used as a jumper block for routing audio signals.
Refer to Section 2.9.1 on page 72 for more information.
Table 26. Auxiliary Line In Connector
Pin Signal
Name
1
Left auxiliary line in
2 Ground
3 Ground
4
Right auxiliary line in
Table 27. Rear Chassis Fan Connector
Pin Signal
Name
1 (Note)
2
+12 V
3 REAR_TACH_OUT
Note:
Pin 1 is Control if the Desktop Board uses the hardware monitoring and fan control ASIC.
Pin 1 is Ground if the Desktop Board uses the hardware monitoring ASIC.
Table 28. ATAPI CD-ROM Connector
Pin Signal
Name
1
Left audio input from CD-ROM
2
CD audio differential ground
3
CD audio differential ground
4
Right audio input from CD-ROM