Hypertherm D845GEBV2 - Manual (Page 113)

BIOS Setup Program
113
4.5 Security Menu
To access this menu, select Security from the menu bar at the top of the screen.
Maintenance Main Advanced Security Power Boot Exit
The menu represented by Table 67 is for setting passwords and security features.
Table 67. Security Menu
If no password entered previously:
Feature Options Description
Supervisor Password No options Reports if there is a supervisor password set.
User Password No options Reports if there is a user password set.
Set Supervisor Password Password can be up to seven
alphanumeric characters. Specifies the supervisor password.
User Access Level
(Note 1)
• No Access
• View Only
• Limited
• Full (default) Sets BIOS Setup Utility access rights for user
level.
Set User Password Password can be up to seven
alphanumeric characters. Specifies the user password.
Clear User Password
(Note 2)
• Ok (default)
• Cancel Clears the user password.
Chassis Intrusion • Disabled (default)
• Log,
• Log, notify once
• Log, notify til cleared Disabled = Disables Chassis Intrusion
Log = Logs the intrusion in the event log
Log, notify once = Halts system during POST.
User must press <F4> to continue. Intrusion
flag is cleared and the event log is updated.
Log, notify til cleared = Halts system during
POST. User must enter BIOS setup Security
Menu and select “Clear Chassis Intrusion
Status” to clear the Chassis intrusion flag.
Notes:
1. This feature appears only if a supervisor password has been set.
2. This feature appears only if a user password has been set.
3. This feature appears only if the Chassis Intrusion log, notify til cleared option has been set.