Hypertherm D845GEBV2 - Manual (Page 105)

BIOS Setup Program
105
Table 60. Primary/Secondary IDE Master/Slave Submenus (continued)
Feature Options Description
DMA Mode • Auto (default)
• SWDMA0
• SWDMA1
• SWDMA2
• MWDMA0
• MWDMA1
• MWDMA2
• UDMA0
• UDMA1
• UDMA2
• UDMA3
• UDMA4
• UDMA5 Specifies the DMA mode for the drive.
Auto = Auto-detected
SWDMAn = Single Word DMAn
SWDMAn = Multi Word DMAn
UDMAn = Ultra DMAn
(This item is read-only unless Type is set to User.)
S.M.A.R.T. • Auto (default)
• Disabled
• Enabled Enables/disables S.M.A.R.T. (Self-Monitoring, Analysis,
and Reporting Technology).
(This item is read-only unless Type is set to User.)
Cable Detected No options Displays the type of cable connected to the IDE
interface: 40-conductor or 80-conductor (for ATA-100
peripherals).