Hypertherm D845GEBV2 - Manual (Page 13)

Product Description
13
Table 2. Feature Summary (continued)
BIOS • Intel/AMI BIOS (resident in the 4 Mbit FWH)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
Instantly Available
PC Technology • Support for PCI Local Bus Specification Revision 2.2
• Suspend to RAM support
• Wake on PCI, CNR, RS-232, front panel, PS/2 devices, and USB ports
Expansion
Capabilities • D845GEBV2: Six PCI bus add-in card connectors (SMBus routed to PCI bus
connector 2)
• D845GERG2: Three PCI bus add-in card connectors (SMBus routed to PCI bus
connector 2)
For information about Refer to
The board’s compliance level with ACPI, Plug and Play, and SMBIOS Section 1.5, page 20
1.2.2 Manufacturing Options
Table 3 describes the manufacturing options on the Desktop Boards D845GEBV2 and
D845GERG2. Not every manufacturing option is available in all marketing channels. Please
contact your Intel representative to determine which manufacturing options are available to you.
Table 3. Manufacturing Options
CNR One Communication and Networking Riser (CNR) connector (slot shared with
PCI bus connector 6 on the Desktop Board D845GEBV2 and with PCI bus connector
3 on the Desktop Board D845GERG2)
Hardware Monitor
Subsystem • Voltage sense to detect out of range power supply voltages
• Thermal sense to detect out of range thermal values
• Three fan sense inputs used to monitor fan activity
• Fan speed control
• Hardware monitoring and fan control ASIC
10/100 LAN Intel ® 82562ET 10/100 Mbit/sec Platform LAN Connect (PLC) device
10/100/1000 LAN Intel ® 82540EM 10/100/1000 Gigabit Ethernet Controller (Desktop Board
D845GERG2 only)
For information about Refer to
Available configurations for the Desktop Boards D845GEBV2 and
D845GERG2 Section 1.3, page 19
#
INTEGRATOR’S NOTE
The LAN and the CNR manufacturing options are mutually exclusive.