Hypertherm D845GEBV2 - Manual (Page 23)

Product Description
23
1.6 Processor
✏
NOTE
Refer to Thermal Considerations (Section 2.12, page 81) for important information when using an
Intel Pentium 4 processor operating above 2.80 GHz with this Intel desktop board.
CAUTION
Use only the processors listed below. Use of unsupported processors can damage the board, the
processor, and the power supply. See Intel’s World Wide Web site for the most up-to-date list of
supported processors for these boards.
The board provides an mPGA478 processor socket. Table 5 lists the supported processors. All
supported onboard memory can be cached. See the processor’s data sheet for cachability limits.
Table 5. Supported Processors
Processor Family Designation System Bus Frequency L2 Cache Size
Pentium ® 4 processor 2.80, 2.66, 2.53, 2.40B,
and 2.26 GHz 533 MHz 512 KB
Pentium 4 processor 2.60, 2.50, 2.40, 2.20, 2A,
1.80A, and 1.60A GHz 400 MHz 512 KB
Pentium 4 processor 2, 1.90, 1.80, 1.70, 1.60,
1.50, and 1.40 GHz 400 MHz 256 KB
Celeron ® processor 1.80, and 1.70 GHz 400 MHz 128 KB
#
INTEGRATOR’S NOTES
• Use only ATX12V-compliant power supplies with the Desktop Board D845GEBV2 and only
ATX12V- or SFX12V-compliant power supplies with the Desktop Board D845GERG2.
ATX12V and SFX12V power supplies have an additional power lead that provides required
supplemental power for the processor. Always connect the 20-pin and 4-pin leads of ATX12V
and SFX12V power supplies to the corresponding connectors on the desktop board, otherwise
the board will not boot. Do not use a standard ATX power supply. The board will not boot
with a standard ATX power supply.
• Refer to Table 7 on page 25 for a list of supported system bus frequency and memory speed
combinations.
For information about Refer to
Processor support Section 1.3, page 19
Power supply connectors Section 2.8.2.2, page 62