Hypertherm D845GEBV2 - Manual (Page 104)

Intel Desktop Board D845GEBV2/D845GERG2 Technical Product Specification
104
4.4.4.1 Primary/Secondary IDE Master/Slave Submenus
To access these submenus, select Advanced on the menu bar, then IDE Configuration, and then the
master or slave to be configured.
Maintenance Main Advanced Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Diskette Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
There are four IDE submenus: primary master, primary slave, secondary master, and secondary
slave. Table 60 shows the format of the IDE submenus. For brevity, only one example is shown.
Table 60. Primary/Secondary IDE Master/Slave Submenus
Feature Options Description
Drive Installed No options Displays the type of drive installed.
Type
• Auto (default)
• User
Specifies the IDE configuration mode for IDE devices.
User allows capabilities to be changed.
Auto fills-in capabilities from ATA/ATAPI device.
Maximum Capacity No options Displays the capacity of the drive.
LBA/Large Mode • Disabled
• Auto (default) Selects the translation mode for the IDE hard disk.
(This item is read-only unless Type is set to User.)
Block Mode
• Disabled
• Auto (default)
Disabled = Data transfers to/from the device occur one
sector at a time.
Auto = Data transfers to/from the device occur multiple
sectors at a time if the device supports block mode
transfers.
(This item is read-only unless Type is set to User.)
PIO Mode • Auto (default)
• 0
• 1
• 2
• 3
• 4 Specifies the PIO mode.
(This item is read-only unless Type is set to User.)
continued