ikan MR7 - Manual (Page 10)

10/51
3-2. Rear
1) DC power input terminal
It supplies DC power. Please check DC rated input voltage.
For DC Adaptor, it can be used from about 7V to 24V for 12V, Battery power.
WARNING: Check power sources and power supply accessories for
compatibility with monitor.
2) SDI 1 input terminal (BNC)
HD/SD-SDI signal input terminal.
Per SMPTE standard, SDI signal input includes Audio signal.
3) SDI-LOOP OUT TERMINAL (BNC)
Output terminal that displays the HD/SD-SDI input signal.
Not displayed when the monitor power is off. (Active Select Output)
4) CVBS (Composite) INPUT TERMINAL (BNC)
Input terminal for CVBS (Composite) signal.
5) CVBS (Composite) OUT TERMINAL (BNC)
Output terminal that displays the CVBS (Composite) input signal.
②
⑦
③
④
⑤
⑥
⑧
①