ikan MR7 User Manual
Page 28
28/51
The Monitor Recognizes
LTC in HANC, VITC1 in HANC , VITC2 in HANC, DVITC (SD-SDI).
① LTC (Longitudinal Time Code) :
Is saved on the Audio Track, Cue, or Address Track of the Video Tape, and
the specification is SMPTE-12M, IEC461.
② VITC (Vertical Interval Time Code) :
VBI is stored on the Video Track of Video Tape. VITC Code is composed as
90 bit which is 10 bit added more to classify individual field with
Redundancy Check on the LTC Code. The specification is SMPTE-12M,
IEC461.
③ DVITC (Digital Vertical Interval Timecode) :
Digitizes Analog VITC Waveform as 8bit or 10bit, used for Digital Video
System. The specification is SMPTE-266M, ITU-T BT.1366.
If the purchased monitor is 7-inch, please configure as DVITC (SD-SDI).
For HD-SDI 1920*1080/60i signal, LTC is located on line10, VITC1 is
located on line9, VITC2 is located on line571. The specification is SMPTE
RP-188, ITU-T BT.1366.
For this monitor, please configure as follow on Time Code Menu.
- LTC in HANC : located on Line 1.
- VITC1 in HANC : located on Line 9.
- VITC2 in HANC : located on Line 571.