ikan MR7 - Manual (Page 8)

8/51
User Zoom (adjustable by up/down knob), 5D Mark II Zoom.
In some cases, the dot indicator for Zoom may not be shown on SDI 720p format.
4) WF/VS
The WF/VS button changes the display in this order: Waveform, Vectorscope,
Waveform/Vectorscope, Wide Waveform, Full Waveform, Full Vectorscope and WF/VS Off.
5) Daylight
Switch the backlight luminance. Backlight luminance will change in this order: Indoor
(Normal), Outdoor (Brighter), Daylight (Brightest).
Format, On the list menu, works as Format SD function
6)7) Function Keys (F1, F2)/SLOW/CMD
User defined. A function can be assigned for each function button.
SLOW : Change playback speed slower between 1/2 to 1/8 speed.
CMD : Opens the command dialog of the list menu.
(Selectable commands are Delete/Copy/Format/Rename/Auto Naming)
On playback of a recorded file, this button works as info On/Off, Volume Setting or
Delete button.
8) LIST/Q_Play
Press and hold for 2 seconds: Enters Playback mode.
Q_PLAY, Plays the latest recorded file. The latest file information is lost when monitor is turned off.
9) MENU
Opens the OSD menu.
10) REC
Start recording.
11) Knob KEY
Brightness, Contrast, Chroma, Phase is adjustable by pressing knob.
On OSD menu or Playback, knob is used to move cursor, select file, or press OK.
12) STOP
Stop recording/playback in record mode.