Ivoclar Vivadent SR Nexco Paste - Manual (Page 55)

55
Practical Procedure
– Restorations with Gingiva Portions
Polishing
to finish the surface, polish the surface in the usual manner with rubber polishers and silicone polishing wheels. the
restorations are prepolished and polished to a high gloss using a goat hair brush, cotton or leather buff as well as
Universal Polishing Paste. Use low speed and limited pressure for prepolishing and high-gloss polishing. adjust the
pressure with the handpiece, not the polishing motor.
Result
– Microroughness on the finished veneering surface is conducive to plaque accumulation. Therefore, polish
carefully.
– Make sure to polish crown margins, interdental areas, occlusal areas, gingiva portions and direct basal
gingiva rests carefully to a high gloss.