Ivoclar Vivadent SR Nexco Paste User Manual
Page 63
63
General Information
– Fr
equently Asked Questions
At what distance from the Quick curing light should the
segments be precured?
The shorter the distance between the light and the object, the
better the level of cure of the material.
Must SR Gel always be used?
For the polymerization of SR Nexco Paste, SR Gel must always be
used. If this is not done, the inhibited layer will be too thick, which
may lead to clinical failure.
Is it possible to use SR Connect also for SR Adoro and Telio?
Yes. SR Connect can be used for all cold- or heat-curing PMMA
resins to which a light-curing composite is applied.
Do I always have to apply SR Nexco Retention Flow?
No, the application of SR Nexco Retention Flow is an option. The
curing depths of the shaded SR Nexco Opaquers are sufficient to
achieve a secure bond between the metal framework and the
veneer. With the more flowable SR Nexco Retention Flow, it is easier
to reach undercuts in the area of the retention beads and thus
achieve additional security for the bond.