KIP AutoCAD - Manual (Page 18)

KIP AutoCAD Installation and User Guide
No part of this publication may be copied, reproduced or distributed in any form without express written permission
from KIP.  2015 KIP. v1
- 18 -
Component Function
13. Adjustments – More Options
Selecting More Options will open a new window here there are few more
options.
• Prompt at plot time – Will open a window allowing adjustments to
be made prior to plotting.
• Disable media warnings – If selected the AC driver will not report
media errors that may occur during printing.
• Plot direct to printer’s IP Address – When selected will print directly
to the KIP Printer via IP Address.
• Plot to Windows printer port – When selected will use the KIP
Windows Driver Port for printing.
14. Pin
Pin printing allows a user to enter a four digit pin into this location prior to
printing. When this job arrives at the Print Queue it will be placed into a
hold pattern. This job cannot be printed or removed from the Queue
without entering the original PIN.
Note: This will not hold up the Print Queue as other jobs will move ahead
of this job until it is released. This gives greater security to jobs being
printed.