K-Patents PR-01-S - Manual (Page 20)

INSTRUCTION MANUAL FOR K-PATENTS PR-01-S (-AX/FM/CS) DOCUMENT/REVISION No. INM 1/14
Effective: May 15, 2009
18
2.12. GENERAL SAFETY CONSIDERATIONS
The process medium may be hot or otherwise hazardous. Use shields and protective clothing adequate for
the process medium - do not rely on avoidance of contact with the process medium.
Precautions when removing the sensor from the process line:
- Make positively sure that the process line is not under pressure. Open a vent valve to the atmosphere.
- For a prism wash system, close a hand valve for the wash medium and disable the wash valve.
- Loosen the clamp cautiously, be prepared to tighten again.
- Be out of the way of any possible splash and ensure the possibility of escape.
- After removal of the sensor, it may be necessary to mount a blind cover for security reasons.
2.13. WARRANTY
K-Patents warrants that all products made by K-Patents shall be free of defects in material and
workmanship. K-Patents agrees to either replace or repair free of charge, any such product or part thereof
which shall be returned to the nearest authorized K-Patents repair facility within two (2) years from the
date of delivery.
2.14. DISPOSAL
When disposing of an obsolete instrument or any parts of an instrument, please observe the local and
national requirements for the disposal of electrical and electronic equipment. The steel Indicating
transmitter enclosure and the aluminum or stainless steel sensor housing can be recycled with other
metallic waste of the same type.