Kreg KRS1030 Universal Steel Stand - Manual (Page 4)

Step 5
Joining Table Top to Stand:
In this step you will be joining the Universal Steel Stand to a Kreg or other table-top of
your choice.
Place the table face-down on your work surface, and have someone help you fl ip the
stand on top of it, as shown in image A. Once the stand is centered, and all edges have
equal overhang on parallel edges, you may begin securing the two together using ¾”
wood screws (not included) and a corresponding driver, as shown in image B.
All Kreg table-top solutions come with pre-drilled holes at their base, which align with
holes in the stand. These tables-tops can be attached to the Universal Steel Stand
using the included ¾” screws. Please reference specifi c table-top instructions for
further detail. For more information on Kreg table tops, visit www.kregtool.com.
A. B.
Step 5 -
Final Assembly
Shown
Mobilize your stand...
Add true mobility to your Universal Steel Stand with our
Heavy-Duty Casters. Built to last and perform, these
casters feature a dual locking mechanism that won’t
roll OR pivot once engaged, resulting in an extremely
stable work station.
Item#
KRS3090