Kreg KKS1000 Klamp Table - Manual (Page 4)

The Glide Pad.
This pad allows the Bench Klamp™ to slide smoothly across the Klamp Trak™ and Klamp
Plate™. Begin by using a dry cloth or paper towel to remove any excess oil from the base of
the Klamp. Separate the Plastic Glide Pad from its paper backing. Then, carefully center and
adhere the pad to the base of the Bench Klamp™, as shown at left. Any part of the pad which
extends beyond the Bench Klamp™’s base may be trimmed off.
The Clamp Pad.
The Clamp Pad protects your workpieces from being marred or otherwise damaged by the
Bench Klamp™. Depending on the type of work you are doing, and the hardness of your
stock, you may add or remove the Clamp Pad at your discretion.
The Anchoring Screw.
This Inter-Lok Anchoring Screw serves as the foundation of the entire Klamp System™. With
it, the Bench Klamp™ can be moved to the Klamp Plate™ and Klamp Trak™ quickly and easily,
and removed again to retain a flat work surface. Begin by threading the Anchoring Screw into
the base of the Bench Klamp
TM . Start with the Anchoring Screw roughly ½ of the way in, and
test the fit on the Klamp Plate™ or Klamp Trak™. Continue to adjust the Anchoring Screw
until it ‘slip-fits’ into the slot without difficulty, and still rotates freely.
Bench Klamp TM Instructions
Cleaning
The slick melamine coating on the Table Top does a
good job of resisting glue but may need some basic
cleaning from time to time. Cleaning the surface
frequently and keeping it free from build-up will
lengthen the life of the top and keep the surface as
smooth/useful as possible. For additional protection
against glue, we recommend coating the surface with
Bates Glue Release (1-888-363-2628). Be sure to follow
the respective product’s directions during application.
Replacement Top
In the event that a replacement top for your Klamp
Table™ is required, contact Kreg directly. Our customer
service professionals will be able to help you order your
replacement top and will get it sent to you as soon as
possible.
Klamp Table TM Maintenance
800.447.8638
[email protected]