Datalogic Scanning Rhino-NET 40012 - Manual (Page 37)

USE AND OPERATION
3
For a detailed list of parameters and of their configuration procedures, please refer to the
SDK Help file on the CD-ROM.
Figure 26 - Scanner Setup: Reader Parameters
Port: assigns the type of port used by the peripheral device. The values are: Serial port
(COM2/Scanner), Bluetooth port, or Cordless Card port (PCMCIA).
Baudrate: defines the communication port baudrate.
Frame Bits: defines the communication port data bits setting.
Stop Bits: defines the communication port stop bits setting.
Parity: defines the communication port parity setting.
Read Timeout: defines the delay in milliseconds for data reception which determines the
end of code. Characters received within this timeout are part of the same code. When the
timeout expires the code is completed and any further data is attributed to the next code.
Scan Parameters
The Scan Parameters control how barcode scanner data is managed by Rhino-NET™. The
Scan parameters are described as follows:
Figure 27 - Selecting Scanner Setup Parameters
23