Datalogic Scanning Rhino-NET 40012 - Manual (Page 43)

USE AND OPERATION
3
directory doesn't exist originally (only Backup exists), and therefore it must be created. At the
next hardware reset, before activating the shell, Windows CE will copy the contents including
all sub-directories of \Backup\Windows to \Windows.
Likewise, to maintain files that must be run at Windows CE startup, (i.e. .exe, .lnk, .vb, .htm,
etc.), it is necessary to copy them to the \Backup\Startup directory. This directory does not
exist originally (only Backup exists), and therefore it must be created. The application
programs will be run after any type of reset (both software and hardware reset).
As an alternative to the Safe Setup function, it is possible to copy the .cab files to the
directory \Backup\Cabfiles (the Cabfiles sub-directory doesn't exists originally and must
therefore be created) and perform a terminal hardware reset to have the application installed.
Once these files are copied to the directory \Backup\Cabfiles, the application will be run after
each reset.
From the second hardware reset on, a message may be displayed such as "<application
name> is already installed. Re-install?". This message blocks the boot process. Press the
[Enter] key to continue the system initialization.
29