Datalogic Scanning Rhino-NET 40012 - Manual (Page 6)

SAFETY REGULATIONS
NOTE
Read this manual carefully before performing any type of connection to the
Rhino-NET™ mobile computer.
The user is responsible for any damages caused by incorrect use of the
equipment or by inobservance of the indication supplied in this manual.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval of
Datalogic could void the authority to use this equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference which may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
RF Safety Notice
CAUTION
This device is intended to transmit RF energy. For protection against RF
exposure to humans and in accordance with FCC rules and Industry
Canada rules, this transmitter should be installed such that a minimum
separation distance of at least 20cm (7.8 in.) is maintained between the
antenna and the general population.
vi