Leprecon LPC V2 User's Manual - Manual (Page 41)

LPC 48 / 96 Users Manual
Page 41
Submasters can be used to build new looks.
5.4 Saving Submasters
1. Set channel levels for Submasters using manual faders, video interface, or
channel selection keys.
2. The stage output will show levels set for Submaster recording. Use the
incremental levels to fine tune the look.
3. Pressing the Enter key on keypad or select Save tab will store the
Submaster data. A message will be displayed, “Scene Saved: Page ##
Sub ##,” which confirms the Submaster was saved.
• The Submaster number will automatically advance so that a sequence
of subs can be recorded.
• If a Submaster already contains data, LPC offers the options of
replacing the current data, inserting a new Submaster, or canceling the
operation.
• Inserting a new Submaster will shuffle all higher numbered
Submasters up to make room for the inserted cue. If there is data on
Submaster 24, that scene will be lost.
Predefined groups can be used also to select channels for recording. Press the
Group key on the front panel to show previously created groups, (see Groups in
section 4.6). Click or touch on the group name to select, then click or touch ‘OK’
to return to the record screen.