Leprecon LPC V2 User's Manual - Manual (Page 61)

LPC 48 / 96 Users Manual
Page 61
8.1 DMX Line Assignment
The first step in controlling an intelligent fixture is to add it to the DMX
Assignment. This is very similar to the process used to add dimmers to the DMX
Assignment covered in section 3.7
From the Setup Menu, choose DMX Assignment. Click the drop down box to
show the list of available manufacturers, and pick the specific fixture from the
manufacturer list.
Note that some fixtures have more than one DMX personality. It’s important that
the DMX mode set in the fixture match the DMX personality selected from the
fixture library.