Leprecon LPC V3 User's Manual - Manual (Page 13)

LPC 48 / 96 Users Manual
Page 13
3 Setup
The main setup screen shows the current software versions, and contains
submenus for all setup functions, (See Figure 3).
Three software components comprise the LPC system, and the revision level and
release date for each of the components is shown in the main Setup screen.
3.1 Touch Screen Calibration
LPC models include software drivers for certain models of ELO touch screen
monitors. The first time the monitor is used, the board may need to be calibrated
for proper touch control.
To calibrate the monitor, press and hold the ‘shamrock’ key. At the same time,
press the ‘setup’ key.
The calibration routine will display a bulls-eye target on the screen in three
different locations. Follow the on-screen prompts, and touch the targets when
instructed.
Once complete, the calibration values will be saved as part of the LPC
configuration. Changing to a different size monitor will require re-calibrating.