Leprecon LPC V3 User's Manual - Manual (Page 42)

LPC 48 / 96 Users Manual
Page 42
Increase by 10
Increase by 5
Increase by 1
Decrease by 1
Decrease by 5
Decrease by 10
Figure 21: Incremental Levels
4.6 Groups
Any set of selected channels can be saved as a group. This provides a shortcut
for using the same channels again later for Cue or Submaster recording, (See
Figure 22). Channels can be selected and de-selected from the group screen as
well.
1. In any Run or Record screen, press the Group key located on the front
panel, or click on the word Group located at the bottom of the screen.
2. Once channels are selected, touch Save As… to create the new group.
3. Give the group a convenient name, and it can be re-used for future
recording.
If there are channels selected when the Group button is pressed, that selection
will be carried into the Group creation screen.