Leprecon LPC V3 User's Manual - Manual (Page 48)

LPC 48 / 96 Users Manual
Page 48
5.6 Submaster Preview
LPC uses a Preview function to check and change subs that have already been
recorded. The background color changes to show that the channel display no
longer shows Stage view.
Preview also allows blind changes to Submasters. Previewing and changing an
active Submaster will show the changes in the board output. Changing a
Submaster that is down will be done blind, with no changes seen on the stage.
From the Submaster Run screen, click or touch the Preview control in the lower
corner of the screen.
The background changes color, and the channel levels shown are the values
of the Submaster, not stage levels.
In Preview mode, all the channel selection methods (faders, touch screen,
channel dialog) can be used to change Submaster channel levels.
Change the channels individually or use the incremental level buttons.
Clicking Save will update the Submaster channel values.
Another Submaster can be previewed, or click Exit to return to Submaster
Run screen.