Leprecon LPC V3 User's Manual - Manual (Page 73)

LPC 48 / 96 Users Manual
Page 73
9 Controlling LED and Intelligent fixtures
Once the LPC is set up with fixtures in the DMX Assignment screen those
fixtures are available for use. Fixtures can be controlled in Run mode without
saving cues, or in Record mode if submaster or stack cues will be saved.
The way the fixtures operate in run and Record modes is quite different.
• When selected in Run mode, fixtures remain in their current settings, so that
small changes can be made ‘live’ with a minimum of disruption.
• In Record mode, selected fixture will have their ‘default’ values for Color,
Beam and Position properties loaded.
After adding fixtures, the LPC Stage view looks like this: