Leprecon LPC V3 User's Manual - Manual (Page 58)

LPC 48 / 96 Users Manual
Page 58
6.8 Cue Override
To jump out of sequence to a different cue, use the Override controls, (See
Figure 33).
1. Press the front panel Cue button this will move the cursor to the Next Step
field.
2. Enter a new cue number, and set timing if it is to be different than the
saved time.
3. Pressing Apply or Enter loads this new cue as the next cue to be played
back when the Go button is pressed.
4. Verify the selected cue is in the Upcoming box.
Figure 33: Cue Override Screen
6.9 Cue Preview
LPC uses a Preview function to check and change Cues that have already been
recorded. When entering Preview, the background color will change to show that
the channel display no longer shows Stage view.
Preview also allows blind changes to Cues. Previewing and changing an active
Cue will show the changes in the board output. Changing a Cue that is down will
be done blind, with no changes seen on the stage.
1. From Cue Run, click or touch the Preview control at the bottom of the