Leprecon LPC V3 User's Manual - Manual (Page 20)

LPC 48 / 96 Users Manual
Page 20
3.8 ArtNet configuration
LPC V3 software supports DMX over Ethernet using the ArtNet protocol. ArtNet
allows LPC to send DMX data a standard Ethernet network. ArtNet nodes are
used to receive data, and convert it back to standard DMX. The LPC and nodes
must be configured to communicate properly.
The Setup area of the LPC software provides the controls for setting up ArtNet.
From the Setup screen, click on ‘Settings’. The Art Net configuration is on the
right side of the setup screen.