LSC Lighting GenVI - Manual (Page 24)

Menu System GenVI Dimmer
Operator Manual V1.0
Page 20
3.9.1 Code Upgrade
LSC Lighting Systems has a corporate policy of continuous improvement to its products. The
GenVI dimmer software (firmware) is subject to this policy as new features are added and
existing features improved. The software version of your GenVI dimmer can be checked from
the “Dimmer Output” home page by pressing Status, About.
To upgrade your GenVI software, download the latest version from the LSC web site,
www.lsclighting.com and save the new software to an SD Card. Both HC and low density
format cards are supported. The file will be called “GNV_V*.bin” where # is the version
number.
Press Config, System, Code Upgrade.
Insert the SD card and follow the onscreen instructions.
3.9.2 Reset
The GenVI provides two different types of reset function. Press Config, System, Reset.
3.9.2.1 Restart
In the unlikely event that the GenVI fails to respond, the operating system may be restarted
so that the software may initialise and recommence normal operation. Performing a restart
will not affect any of the settings or memory.
3.9.2.2 RESET To Defaults
This will ERASE all memory from the GenVI and reset to defaults.