Setup, English – Marantz SR6001 User Manual

Page 29

Advertising
background image

ENGLISH

26

SETUP

After all components are connected, initial setup
must be performed.

ONSCREEN DISPLAY MENU SYSTEM

The SR6001 incorporates an onscreen menu system,
which makes various operations possible by using
the cursor (

3, 4, 1 , 2) and ENTER buttons on the

remote control unit or on the front panel.

Note:

• To view the onscreen displays, make certain you

have connected the MONITOR OUT jack on the rear
panel to the composite, S-Video, component video
or HDMI input of your TV or projector. (See page
19, 20)

1.

Press

the

AMP button on the remote control

unit. (This step is not needed when operating
the setup menus from the SR6001.)

2.

Press

the

MENU button on the remote control

or press the MENU button on the front panel.
The “MAIN MENU” of the OSD menu system is
displayed.

There are 6 items in the MAIN MENU.

3.

Select the desired sub-menu with the

3 or 4

cursor buttons and press the ENTER button.
The display will change to the selected sub-
menu.

Notes:

• If you desire to adjust any sub-menu, you need to set

it to UNLOCKED.

• To lock sub-menus, set items 1-6 on the MAIN

MENU to “LOCKED”.

<LOCKING SUBMENUS>

(1) Move the cursor to “1. INPUT SETUP” in the

MAIN MENU.

(2) Select the “

0” mark left of “LOCKED” with the 1

or

2 cursor buttons.

4.

To exit from OSD menu system, press the

EXITbutton, or move the cursor to EXIT and
press the ENTER button.

Note:

• Settings are entered with the ENTER button on the

unit or the remote control unit.

SR6001 FRONT BUTTON CONTROL

RC5001SR BUTTON CONTROL

CAT

T.DISP

F.DIRECT

PTY

MULTI/

MENU

ENTER

EXIT

INFO

T.TONE
/SET UP

M-SPKR

REC

EXIT button

Press this button to exit the OSD
menu system.

UP button

MENU button

Press this button to display the
OSD menu system.

DOWN button

ENTER button

LEFT button

MultEQ

ENTER

MENU

HT-EQ

7.1CH INPUT

AUTO

MULTI

T-MODE

MEMORY

DISPLAY

EXIT

BAND

MIC

SPEAKER

MULTI

UP button

RIGHT button

DOWN button

MENU button

Press this button to display the

OSD menu system.

EXIT button

Press this button to exit the
OSD menu system.

LEFT button

ENTER button

AMP (Amplifi er) button

TAPE

REMOTE CONTROLLER

RC5001SR

MD

CDR

CD

AMP

AUX2

TUNER

AUX1

RIGHT button

SR6001U DFU_1_ENG 2_4.indd 26

SR6001U DFU_1_ENG 2_4.indd 26

06.12.21 4:14:29 PM

06.12.21 4:14:29 PM

Advertising