Marantz SR6001 User Manual

Page 48

Advertising

ENGLISH

TEMPORARILY TURNING OFF THE SOUND

CAT

+10

HT-EQ

MULTI/

MENU

SPKR A/B

ENTER

INFO

CH/

M-SPKR

VOLUME

7.1CH IN

A/D

MEMO

MUTE

To temporarily silence all speaker outputs such as
when interrupted by a phone call, press the MUTE
button on the remote.
This will interrupt the output to all speakers and the
head-phone jack, but it will not affect any recording or
dubbing that may be in progress.
When the system is muted, the display will show
“MUTE” .
Press the MUTE button again to return to normal
operation.

USING THE SLEEP TIMER

T.MODE

SEND

INPUT

EX/ES

VIRTUAL

dts

P.DIRECT

OFF

SET

AUTO

SURROUND

DISPLAY

LEARN

LIP SYNC/

SOURCE

SLEEP

BAND

To program the SR6001 for automatic standby, press
the SLEEP button on the remote.
Each press of the button will increase the time before
shut down in the following sequence.

OFF

The sleep time will be shown for a few seconds in the
display on the front panel, and it will count down until
the time has elapsed.
When the programmed sleep time has elapsed, the
unit will automatically turn off.
Note that the SLEEP indicator on the display will
illuminate when the Sleep function is programmed.
To cancel the Sleep function, press the SLEEP
button until the display shows “SLEEP OFF” and the
SLEEP indicator will disappear.

VIDEO CONVERT

ANALOG VIDEO CONVERSION

The SR6001 is equipped to convert video signals
for monitor output. Because of this, indifferent of
the connection (VIDEO, S-VIDEO, COMPONENT
VIDEO) between the playback device and the
SR6001, listening and viewing are possible with a
single higher grade cable between the MONITOR
OUT terminal of the SR6001 and the monitor.

UP-CONVERSION FROM ANALOG VIDEO
SIGNALS TO HDMI

The up-conversion feature of the SR6001 can output
the input analog video signals (for component video
signals of 480i, 480p, 1080i and 720p resolution, and
S-Video and Video (composite) of 480i resolution) to
the HDMI MONITOR terminal.

Notes:

• HDMI video input is only output to the HDMI

MONITOR OUT terminal of the SR6001. If
connecting a playback device such as a DVD
player to the HDMI input jack, connect the HDMI
MONITOR OUT terminal of the SR6001 to a TV
monitor.

• This mode is unavailable for the REC out terminal.

• This mode is unavailable for still picture, fast

forward and reverse play on video component.

• If, while attempting to use the video convert feature,

the SR6001 cannot synchronize with the display
device, “NO SIGNAL” appears on the monitor or
noise is generated, this feature cannot be used. All of
these signs are caused by equipment incompatibility;
there is nothing wrong with the SR6001.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”. Next,
connect the video input signal to the display component
via the MONITOR OUT terminal under VIDEO and
the S-video input signal to the display component via
the MONITOR OUT terminal under S-VIDEO.

• The video convert feature constantly monitors

input video signals and determines whether to
convert the input signals or not. However, some
input video signals cannot be detected correctly.
If this occurs, set “VIDEO CONVERT” in the
“VIDEO SETUP” menu to “DISABLE”.

CONNECTION EXAMPLE

• When a monitor is connected to the HDMI

MONITOR OUT terminal of the SR6001

DIGITAL

VIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

MENU

PURE DIRECT

HT-EQ

7.1CH INPUT

MODE

AUTO

MULTI

A/B

T-MODE

MEMORY

CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/STANDBY

READY

VIDEO

or S-VIDEO

or component

HDMI

or HDMI

Notes:

• If the resolution of the component video signal

input from the playback device is other than 480i,
480p, 1080i or 720p, images are not output from the
HDMI MONITOR OUT terminal of the SR6001.

• If the resolution of the S-Video or Video signal input

from the playback device is other than 480i, images
are not output from the HDMI MONITOR OUT
terminal of the SR6001.

• When a monitor is connected to the VIDEO or S-

VIDEO MONITOR OUT terminals of the SR6001

DIGITAL

VIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

MENU

PURE DIRECT

HT-EQ

7.1CH INPUT

MODE

AUTO

MULTI

A/B

T-MODE

MEMORY

CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/STANDBY

LFE

DIGITAL

SURROUND

V-OFF

DISP

MULTI

AUTO

TUNED

SPKR A B

NIGHT

PEAK

ANALOG

DIGITAL

ATT

SLEEP

SURR

DIRECT

AUTO

DISC 6.1

MT X 6.1

PCM

AAC

READY

VIDEO

or S-VIDEO

VIDEO

or S-VIDEO

or component

HDMI

Notes:

• The HDMI video signal input from the playback

device is not output from the VIDEO or S-VIDEO
MONITOR OUT terminals of the SR6001.

• If the resolution of the component video signal input

from the playback device is other than 480i, it is not
output from the VIDEO or S-VIDEO MONITOR
OUT terminals of the SR6001.

• When a monitor is connected to the COMPONENT

VIDEO MONITOR OUT terminal of the SR6001

DIGITAL

VIDEO

S-VIDEO

AUX 1 INPUT

AUDIO

VOLUME

DOWN

STANDBY

PHONES

INPUT SELECTOR

AV SURROUND RECEIVER SR6001

MultEQ

ENTER

MENU

PURE DIRECT

HT-EQ

7.1CH INPUT

MODE

AUTO

MULTI

A/B

T-MODE

MEMORY

CLEAR

DISPLAY

EXIT

SPEAKERS

BAND

MIC

PURE DIRECT

SURROUND

SPEAKER

MULTI

DSD

POWER ON/STANDBY

READY

VIDEO

or S-VIDEO

component

or component

HDMI

Notes:

• The HDMI video signal input from the playback

device is not output from the COMPONENT
VIDEO MONITOR OUT terminal of the SR6001.

Notes of OSD menu system:

• The setup menu can be displayed through all

video out terminals (“HDMI”, “COMPONENT”,
“SVIDEO” and “VIDEO”).

• OSD information is output only to the VIDEO and

S-VIDEO MONITOR OUT terminals.

OSD information is also output when the video

conversion feature is on and the video signal input
to the VIDEO or S-VIDEO input jack of the SR6001
is converted and output from the COMPONENT
VIDEO or HDMI MONITOR OUT terminals.

I/P CONVERT

The video circuit of the SR6001 is equipped with an
I/P conversion feature.
When this feature is on, 480i analog video signals
(VIDEO, S-VIDEO or COMPONENT VIDEO) input
from a playback device can be converted to 480p and
progressively output to the COMPONENT VIDEO or
HDMI MONITOR OUT terminals of the SR6001.
(For setting instructions, see page 39)

SR6001U DFU_1_ENG 3_4.indd 45

06.12.21 4:15:38 PM

Advertising

Popular Brands

Popular manuals