Microcom 428T - Manual (Page 34)

Getting Started Chapter 3
3-18 428T Operator’s Manual - 880037-0141
3.9.2.3 Import/Export Settings
The driver provides a way to Export or Import the driver configuration file (.drs file). This is
helpful in troubleshooting or in helping getting a customer up and running with the proper
setup.
Figure 3-14 Import/Export Settings Tab
3.10 MICPrinter USB Windows Driver
MICPrinter is a driver that allows most traditional Windows applications to print to a
Microcom printer equipped with fast USB capability. The Micprinter utility may also be used
in a command line environment if more than one device instance is needed. The
MicOptions GUI will only support one device at a time
The installation of the driver will require that the user has Administration privileges on the
host computer to complete the installation. Please note that the drivers should be installed
before connecting the printer and turning it on.
The first step would be to execute the MICPrinter installer (MICPrinter-Setup.exe) to install
the utility onto your system.
The first screen will be similar to: