Microcom 412 - Manual (Page 19)

Chapter 2 Basic Operation
412 Operators Manual 11
7. Use the feed button to align the labels. (Be sure to remove the labels as the are
peeled.)
8. Enable the peel-and-dispense mode using the ^A1^D98.
2.6 PRINT HEAD PRESSURE ADJUSTMENT
When using narrow media, it is possible to increase drive roller life by reducing the print head
pressure. To make the adjustment, simply turn the green adjustment knob (see Figure 5)
counter-clockwise. If thick tags are used, additional pressure may be added by turning the
knob clockwise.
Print Head Pressure Adjustment
Figure 5a