Microcom 412 - Manual (Page 97)

Appendix D Quick Reference Command Summary
412 Operators Manual 89
^A ^D COMMAND
22 Change SW2: Software dip switch #2. Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******.)))),
******.)))),*
*****.)))),**
***** Power-up Label Format
***** 000=RESERVED
***** 001=ROM or Saved Format File 1
***** 010=ROM or Saved Format File 2
***** 011=ROM or Saved Format File 3
***** 100=ROM or Saved Format File 4
***** 101=ROM or Saved Format File 5
***** 110=ROM or Saved Format File 6
***** 111=ROM or Saved Format File 7
****.))))Q 1=Use Saved Format File, 0=Rom Format
***.)))))Q 1=Print Button Enable, 0=Disable
**.))))))Q
1=Disable Button Use, 0=Enable
*.)))))))Q 1=>RESTARTED< Response Enable, 0=Disable
.))))))))Q 1=Clear Text Enable, 0=Disable
23 Change SW3: Software dip switch #3. Below is the ^AB sequence:
12345678
^ABxxxxxxxx
*******. Detect Black Line On Power-up
******.Q 1=Enable Binary Compression, 0=Disable
*****.)Q Always 0
****.))Q 1=Enable “Head-up” switch, 0=Disable
***.)))Q Always 0
**.))))Q 1=Send Response After Print (COM1)
** 0=No Response After Print
*.)))))Q 1=Invert >INPUT 1< Polarity, 0=Normal
.))))))Q 1=Disable Extended ASCII, 0=Enable