Microsens MS453522M - Manual (Page 106)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
101
Forward Delay:
You can set the root bridge forward delay time. This figure is set by root bridge only.
The forward delay time is defined as the time spent from Listening state moved to
Learning state and also from Learning state moved to Forwarding state of a port in
bridge. The forward delay time contains two states, Listening state to Learning state
and Learning state to Forwarding state. It assumes that forward delay time is 15
seconds, then total forward delay time will be 30 seconds. This has much to do with
the STP convergent time which will be more than 30 seconds because some other
factors.
The valid value is 4 ~ 30 seconds, default is 15 seconds.
Force Version:
Two options are offered for the user’s choosing STP algorithm. One is RSTP and the
other is STP. If STP is chosen, RSTP will run as a legacy STP. The switch supports RSTP
(802.1w) which is backward compatible with STP (802.1d).
Fig. 3-46