Microsens MS453522M - Manual (Page 141)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
136
3-22. Reboot
We offer you many ways to reboot the switch, including power up, hardware reset and
software reset. You can press the RESET button in the front panel to reset the switch. After
upgrading software, changing IP configuration or changing VLAN mode configuration, then you
must reboot to have the new configuration taken effect. Here we are discussing is software
reset for the “reboot” in the main menu.
Function name:
Reboot
Function description:
Reboot the switch. Reboot takes the same effect as the RESET button on the front panel of
the switch. It will take around thirty (30) seconds to complete the system boot.
Parameter description:
Save and Reboot:
Save the current settings as start configuration before rebooting the switch.
Reboot:
Reboot the system directly.
Fig. 3-74