Microsens MS453522M - Manual (Page 139)

MICROSENS 8 Port Gigabit Ethernet Switch User’s Manual
134
3-20. Log
This function shows the log data. The switch provides system log data for users. There are
19 private trap logs, 5 public trap logs. The switch supports total 120 log entries. For more
details on log items, please refer to the section of Trap/Alarm Configuration and SNMP
Configuration.
Function name:
Log Data
Function description:
The Trap Log Data is displaying the log items including all SNMP Private Trap events, SNMP
Public traps and user logs occurred in the system. In the report table, No., Time and Events
are three fields contained in each trap record.
Fig. 3-72
Parameter description:
No.:
Display the order number that the trap happened.
Time:
Display the time that the trap happened.
Events:
Display the trap event name.
Auto Upload Enable:
Switch the enabled or disabled status of the auto upload function.
Upload Log:
Upload log data through tftp.
Clear Log:
Clear log data.