Montigo 34FID - Linear - Manual (Page 29)

Page 29
XG0514-150204
I-Series Indoor Gas Fireplace
Installation
Leveling the Unit
This unit has 4 leveling screws, 2 located inside the rear of the
firebox and 2 located at the bottom front of the Rear Faceplate.
Once the unit is in position, you can use a Phillips screw driver or
Slotted screw drivers to adjust each leveling screw as required.
2). Rear leveling screw adjustment (Linear burner version shown)
Figure 80 Sec.4
3). Front leveling Screw adjustment (Linear burner version shown)
Figure 81 Sec.4
1). Remove burner, see section on burner removal and install
4). Reinstall the burner.