Maintenance – Montigo 34FID - Linear User Manual
Page 49
Advertising
Page 49
XG0514-150204
I-Series Indoor Gas Fireplace
Maintenance
Figure 16 Sec.1
Figure 17 Sec.6
6). Cut the Zip Strap holding the Fan Wire Harness.
7). Cut the Zip Strap that holds the Fan Wire Harness in the Valve
Compartment.
Figure 18 Sec.6
8). Disconnect the Fan Wire Harness.
9). Disconnect the Fan Wire Harness at the back as well.
Figure 19 Sec.6
10). Remove 3 screws that mount each fan in place.
Figure 20 Sec.6
11). Remove the Blowers from the Fireplace.
Figure 21 Sec.6
Advertising