Nevion FR-2RU-10-2 - Manual (Page 6)

FR-2RU-10-2 Rev. N
nevion.com | 6
2.4 Power consumption
The current draw in the Flashlink frame is limited by the power supplies. Overloading
the power supplies will cause the power units to malfunction.
The maximum power limits are as followed:
Flashlink frame with the PSU 16653 PWR-AC-75W:
+5V -
45W
+15V - 15W
-15V - 15W
Flashlink frame with the PSU 11374 PWR-AC15/15/5/5V:
+5V -
30W
+15V - 15W
-15V - 15W
The sum of power for all cards on each rail must not be higher than the above listed
limits. The power consumption for each of the power supply rails is found in the user
manual for each Flashlink card, as this is not the same for all Flashlink cards.
The power supplies do not support load sharing. Hence, a second PSU in
the frame does not increase the maximum power limits for the system.